Explore all of these available features below!

Sharing Setup

When setting up a bulk share or dynamic share, one of the settings to configure is the Sharing setup. This setting determines what records are sent out with the share. There are three options: Share table records only, Share all table records and child records, and Share the last descending child of each table record. The last option is set as the default. Scroll down a bit for a breakdown of each option. You can also read more about this setting at Replicating ServiceNow's Parent Child Hierarchy.

You can set this feature how you desire at the time of creating your dynamic share or bulk share Here's how to change the setting:

1. In your sharing ServiceNow instance, go to Perspectium > Perspectium Core > Shares > Dynamic Share or Bulk Share > View Dynamic Shares or View Bulk Shares.
   
   
2. Find and click into the dynamic share or bulk share that you want to change the sharing setup for.
   
   
3. In the resulting dynamic share or bulk share page, in the General Settings section, use the Sharing setup dropdown to select the option you want.
   
   
4. Click Update.

Share table records only

This feature allows you to share only records for the table you select in your setup of a dynamic or bulk share. Otherwise, by default, shares will share records for the table you select, as well as the last descending associated child records for that table. So, this feature disables the sharing of those associated child records and shares the base table only. 

For more information on this, see Replicating ServiceNow's Parent Child Hierarchy.

Share all table records and child records

This feature allows you to share all child records associated with a table, in addition to the table records themselves. Otherwise, by default, shares will share records for the table you select, and the last descending associated child records for that table. So, this feature enables the sharing of all associated child records along with the base table. 

Please note that using this option for dynamic share may result in slowed performance in your ServiceNow instance when using business rules. 

For more information on this, see Replicating ServiceNow's Parent Child Hierarchy.

Share the last descending child of each table record

This feature for dynamic shares and bulk shares allows you to share only child records that are directly associated with the chosen table, in addition to the table records themselves. This is the default option.

For more information on this, see Replicating ServiceNow's Parent Child Hierarchy.

↑ Go to top of page

Conditional shares

This feature allows you to create conditional shares that can be used to share records to multiple target queues and/or using multiple table maps.

Conditional bulk shares will share out records that meet your specified conditions once at a specified time.

Conditional dynamic shares will share out records that meet your specified conditions as records are created, updated, and/or deleted.

Here's how to create a conditional share:

1. In your sharing ServiceNow instance, go to Perspectium > Perspectium Core > Shares > Dynamic Share or Bulk Share > View Dynamic Shares or View Bulk Shares.
   
   
2. Find and click into the dynamic share or bulk share that you want to configure.
   
   
3. In the resulting dynamic share or bulk share page, in the Runtime Settings tab, under the Triggers section, check the Conditional share box. This will reveal a PSP Conditional Shares tab below the Related Links section.
   
   
   
   
4. Click the new PSP Conditional Shares tab, and then click New. If using Google Chrome, you may see a popup asking if you want to leave the site—click Leave.
   
   
5. On the resulting page, use the Target Queue field and the search icon to select a target queue for the conditional shares.
   
   
6. (Optional!) Check the Use Table Map box if you want to use a table map for your conditional share, and use the search icon to find and select the table map you want to use.
   
   
   
   
7. Now, you're ready to set conditions for the share:
   
   
   1. Click the lock icon next to Domain, and then the search icon to choose a domain.
   2. To share out all records in all child domains that match the filter conditions you create, check the Share as Child Domain box.
   3. Next to Condition, use the choose field dropdown to choose a field that you want to add filter conditions to. Then, choose an operator and value for that filter. To check which operators are available for ServiceNow field types, see operators available for filters and queries.
   4. To add more conditions, click Add Filter Condition and repeat Step 7c. To add a conditional "or" clause, click Add "OR" Clause instead. 
   5. (Optional!) Click X in line with any of the filters if you want to remove that filter.
   6. (Optional!) Use the Company field to find and select a company to filter on, if you want to filter the conditional share by company.
      
   7. (Optional!) Use the Test Record option to choose a record to test your conditional share for.
      
      
8. Finally, when your conditions for the share are set, click Submit.
   
   
9. Back in the dynamic share of bulk share page, click Update. Or, if it's a bulk share, you can click Execute Now. Or, if it's a dynamic share, you can click Run a Bulk Share to run your conditional share as a bulk share first before dynamically sharing records based on the conditions you set.

↑ Go to top of page

ServiceNow attachments

Include attachments

This feature allows you to sync your ServiceNow attachments along with your dynamic share or bulk share. Here's how:

1. In your sharing ServiceNow instance, go to Perspectium > Perspectium Core > Shares > Dynamic Share or Bulk Share > View Dynamic Shares or View Bulk Shares.
   
   
2. Find and click into the dynamic share or bulk share that you want to configure.
   
   
3. In the resulting dynamic share or bulk share page, in the Runtime Settings tab, under the Additional Records section, check the Include attachments box.
   
   
4. Click Update. 

Include embedded images or videos

This feature allows you to include embedded images and videos within dynamic shares or bulk shares, so that the subscribing instance(s) to display these images/videos properly when displaying the selected table's records.

This feature is only available for tables that have HTML or Translated HTML field types that support embedded images and videos (for example, the kb_knowledge table). For any other field types (such as String), embedded images/videos will not be shared out properly. For more information on this, see HTML field type.

If the images or videos you want to embed are categorized as an Attachment type, then you can simply use the Include attachments option. Otherwise, here's how to include embedded images/videos:

1. In your sharing ServiceNow instance, go to Perspectium > Perspectium Core > Shares > Dynamic Share or Bulk Share > View Dynamic Shares or View Bulk Shares.
   
   
2. Find and click into the dynamic share or bulk share that you want to configure.
   
   
3. In the resulting dynamic share or bulk share page, in the Miscellaneous tab, check the Include embedded images/videos box.
   
   
4. On the subscribing ServiceNow instance, you must subscribe to the follwing tables in order for embedded images/videos to be properly synced between instances:
   
   
   • db_image
   • db_video
   • sys_attachment
   • sys_attachment_do
     
     
5. Click Update. 

↑ Go to top of page

ServiceNow work notes and comments

This feature allows you to include work notes and comments, referred to as journal fields in ServiceNow, in your dynamic shares and bulk shares. This feature requires you to configure a ServiceNow instance as a subscriber.

Here's how:

1. In your sharing ServiceNow instance, go to Perspectium > Perspectium Core > Shares > Dynamic Share or Bulk Share > View Dynamic Shares or View Bulk Shares.
   
   
2. Find and click into the dynamic share or bulk share that you want to configure.
   
   
3. In the resulting dynamic share or bulk share page, in the Runtime Settings tab, in the Additional Records section, check the Include journal fields AND the Include audit log boxes. You must check both of these boxes in order to accurately update the history/activity log on your subscribing ServiceNow instance. For more information about how this works in ServiceNow, see journal fields and audit logging.
   
   
4. (Optional!) Upon checking the Include audit log box, it will reveal a Filter audit fields box—if you want, you can check this box in order to specify which audit log records to be shared out. This option is helpful if you want to share out only audit records that are related to specific fields on the table being setup for this share. For example, if you are setting up a dynamic share on the Computer (cmdb_ci_computer) table and only want to share out audit records for changes on the Name (name) field.
   
   In order to filter the audit fields, check the Filter audit fields box, which will reveal a Filter Audit Fields tab in the table at the bottom of the page. Click New and in the resulting Share Field page, choose the field that you want to filter and share out audit records on. You can add as many fields as you wish.
   
   If you have checked the Filter audit fields box, but don't add any specific fields, then no audit records will be shared at all. If you want to share audit records, but don't need to specify  filters, then make sure to leave that box unchecked.
   
   
   
   
5. Click Update.

↑ Go to top of page

View names

This feature allows you to control the number of fields being shared out from your ServiceNow table. Otherwise, by default, dynamic shares and bulk shares will share all fields available in a table. To enable this feature, you'll want to create a form view, and then personalize it. For information on how to do this, see personalize a form.

Here's how to configure a share so that it shares only specific fields:

1. In your sharing ServiceNow instance, go to Perspectium > Perspectium Core > Shares > Dynamic Share or Bulk Share > View Dynamic Shares or View Bulk Shares.
   
   
2. Find and click into the dynamic share or bulk share that you want to configure.
   
   
3. In the resulting dynamic share or bulk share page, in the Miscellaneous tab, use the View name field to type your form view name.
   
   
4. Click Update. 

↑ Go to top of page

Referenced field records

This feature allows you to share field records that are related to the base table you are dynamic or bulk sharing. For example, if you are dynamic sharing the Incident table, you can use this feature to share the referenced fields Assigned To User (sys_user) and Configuration Item (cmdb_ci) for each incident record. 

Here's how to enable the feature:

1. In your sharing ServiceNow instance, go to Perspectium > Perspectium Core > Shares > Dynamic Share or Bulk Share > View Dynamic Shares or View Bulk Shares.
   
   
2. Find and click into the dynamic share or bulk share that you want to configure.
   
   
3. In the resulting dynamic share or bulk share page, in the Runtime Settings tab, check the Include referenced field records box. This will add a Referenced Field Records tab at the bottom of the page. 
   
   
4. Click the Referenced Fields Records tab, and click either Add all referenced fields to add all fields that are referenced by the base table you are sharing, or click New if you want to manually select the specific fields.
   1. If you press New, you'll be taken to a new form where you can manually select the Field you want. If using Google Chrome, you may see a popup asking if you want to leave the site—click Leave. Once you've added the Field, click Submit. Repeat Step 4a for as many fields as you want.
      
      
5. Back in the dynamic share or bulk share page, click Submit.

↑ Go to top of page

Before/after share scripts

The before share scripts feature allows the current record being share out to be processed after it is loaded into a GlideRecord, but before it is encrypted and queued up to the Perspectium Cloud Server. Before share scripts expect server-side javascript and is preconfigured with a globally available variable called current, which is the GlideRecord object that is going to be shared.

The after share scripts feature allows you to specify a script that will run after your dynamic share or bulk share has shared a record. This can be useful for when you run scripts in the before share script for your dynamic/bulk share that you want to then cancel out after the share has run.

Variables to use

Click to reveal which variables to use

Variables to use

Variable	Description	Accessible in Before share script	Accessible in After share script
psp_action	To specify the “action” value of records being shared. The “action” is the value that appears after the table name in the “name” field of outgoing DataSync messages. For example, action is “insert” in “incident.insert” (for records being inserted), “update” in “incident.update” (records being updated) and so forth. This is useful for integrations with other systems where you want the table to designate a different action from the default one ServiceNow specifies. Say you are integrating with another system and using the correlation_id to designate the incident record's number in the other system. If there was a failure creating the incident in the other system and you do an update to the incident in ServiceNow, instead of sending the record as an “update”, you may want to send it as an “insert” instead so as to create the incident in the other system this time. The following script will accomplish this by setting action to “insert” when the correlation_id field is not populated: if (current.correlation_id == null || current.correlation_id == "") {     psp_action = "insert"; }
share_gr	To access the bulk and dynamic share records themselves from the Before Share Script. For example, the following will log the value of the current bulk/dynamic share record's system id: gs.log(share_gr.sys_id);
previous	To access the previous record in a dynamic or bulk share (ie, a record before it has been modified). For example, the following script will log the value of the previous record’s short description: gs.log(previous.short_description);  NOTE: You can only access the previous variable when the Business Rule When is set to before or after under Trigger Conditions of the dynamic. In addition, the information above only applies to dynamic shares; the data shared in a bulk share is historical and will not have been modified.
psp_key	To access the key value of the outbound message, you can change the psp_key global dynamically. To enable, turn off com.perspectium.validate_mismatch_key in your Perspectium properties. // run on before share psp_key = "custom_client";
psp_name	By default, the name field in the outbound message consist of the table name followed by the action, i.e. incident.insert. With psp_name, you can change the table name in the name field before the outbound message is sent.  psp_name = "custom_name"; This global variable is helpful for cases like sharing archived records as deleted records from the original table to delete records in a database. See below steps:  1 Create bulk share on an archived table 2 Set Before share script as: psp_action = "delete"; psp_name = psp_name.substring("ar_".length); 3 Check Share only selected fields and add sys_id in the Share Fields related list.   WARNING: This is NOT recommended to change when sharing records from a table for the first time/creating a new table in the database.  NOTE: If you are using custom schema, the value set in psp_name will get edited to have the custom schema’s table prefix/suffix: This is intended to be used with DataSync Agent only Must be a valid table name
ignore	To prevent the current record from being shared in a dynamic or bulk share, you can set the variable ignore to true in the Before share script. For example, the following script ignores the dynamic sharing of an incident record when the priority field value is 1: if (current.priority == 1) {     ignore = true; }

Create before or after share scripts

Here's how to create before and/or after share scripts:

1. In your sharing ServiceNow instance, go to Perspectium > Perspectium Core > Shares > Dynamic Share or Bulk Share > View Dynamic Shares or View Bulk Shares.
   
   
2. Find and click into the dynamic share or bulk share that you want to configure.
   
   
3. In the resulting dynamic share or bulk share page, click the Scripting tab.
   
   
4. Type your before and/or after share script in the appropriate field. For some scripting examples, see the next section.
   
   
5. Click Update. 

Examples of before and after scripts to use

function listChangedFields(obj){
	var flds = [];
	var aud = new GlideRecord("sys_audit");
	aud.addQuery("documentkey", obj.sys_id);
	aud.addQuery("record_checkpoint", obj.sys_mod_count);
	aud.query();
	while (aud.next()){
		flds.push(aud.getValue("fieldname"));
	}
	return flds;
}

var changedFields = listChangedFields(current);
var ignoreFields = ["priority", "urgency"]; // If any changed field falls outside that list, the update will be sent

ignore = true;

var util = new ArrayUtil();
for (var i=0; i<changedFields.length; i++){
	if (!util.contains(ignoreFields, changedFields[i])) ignore = false;
}

cancel = true;

var lang = gs.getSession().getLanguage(); 
var gc = (typeof GlideController != 'undefined') ? GlideController : Packages.com.glide.script.GlideController;
gc.putGlobal('user_lang', lang);
gs.getSession().setLanguage("en");

var gc = (typeof GlideController != 'undefined') ? GlideController : Packages.com.glide.script.GlideController;
var userlang = gc.getGlobal('user_lang');
gs.getSession().setLanguage(userlang);

var pBS = new PerspectiumBulkShare(bulkshare_gr);
var tgr = new GlideRecord('ticket');
tgr.addQuery('state', '1');
tgr.query();
while(tgr.next()){
    pBS.addSysId(tgr.sys_id);
}

↑ Go to top of page

Create filter conditions for a dynamic share or bulk share

This feature allows you to share data only when certain conditions are met. You can also set up filter conditions for table maps. For more information about creating filter conditions in ServiceNow, see condition builder.

Here's how to create filter conditions for a ServiceNow dynamic share or bulk share:

1. In your sharing ServiceNow instance, go to Perspectium > Perspectium Core > Shares > Dynamic Share or Bulk Share > View Dynamic Shares or View Bulk Shares.
   
   
2. Find and click into the dynamic share or bulk share that you want to configure.
   
   
3. In the resulting dynamic share or bulk share page, click the Runtime Settings tab, and go to the Triggers section.
   
   
4. Next to Condition, use the choose field dropdown to choose a field that you want to add filter conditions to. Then, choose an operator and value for that filter. To check which operators are available for ServiceNow field types, see operators available for filters and queries.
   1. To add more conditions, click Add Filter Condition and repeat Step 4. To add a conditional "or" clause, click Add "OR" Clause instead. 
   2. (Optional!) Click X in line with any of the filters if you want to remove that filter.
      
      
5. Click Update.

↑ Go to top of page

Encryption mode and encryption method

Perspectium supports multiple ciphers to encrypt your data when being shared out of your ServiceNow instance. The default cipher is TripleDES. 

You can set a different encryption cipher for your entire instance via the Properties module (Perspectium > Control and Configuration > DataSync Settings), OR you can set it when you create a shared/subscribed queue. You can also choose which encryption mode to use.

There available encryption modes are:

And if you are going to change the encryption key, make sure to follow these requirements:

<subscribe>
            <task>
            	<task_name>multibyte_tester</task_name>
            	<handler>com.perspectium.replicator.sql.SQLSubscriber</handler>
             	<amqp_queue>psp.out.replicator.dloo_mac</amqp_queue>             
                <decryption_key>The cow jumped over the moon</decryption_key>
                
                <database_server>127.0.0.1</database_server>
                <database_user>xxx</database_user>
                <database_password>xxx</database_password>
                <database_port>3306</database_port>
                <database_type>mysql</database_type>
                <database_parms>autoReconnect=true&characterEncoding=UTF-8</database_parms>
                <database>psp_repl</database>
            </task>
        </subscribe>

↑ Go to top of page

View records processed

This feature allows you to see a breakdown of the total number of records processed and shared out on a dynamic or bulk share, including the number of auxiliary records shared if options such as Include attachments are activated. 

Here's how to view the records processed:

1. In your sharing ServiceNow instance, go to Perspectium > Perspectium Core > Shares > Dynamic Share or Bulk Share > View Dynamic Shares or View Bulk Shares.
   
   
2. Find and click into the dynamic share or bulk share that you want to review.
   
   
3. Scroll down to the Records Processed tab in the table at the bottom of the page. The tab will only appear if you have already executed the share (otherwise there will be no records sent yet).

↑ Go to top of page

Notes

This feature allows you to include simple notes for internal communication/organizational purposes. Here's how to access:

1. In your sharing ServiceNow instance, go to Perspectium > Perspectium Core > Shares > Dynamic Share or Bulk Share > View Dynamic Shares or View Bulk Shares.
   
   
2. Find and click into the dynamic share or bulk share.
   
   
3. Click the the Miscellaneous tab to find the Notes field.

↑ Go to top of page

Switch to legacy view

This feature allows you to switch between two "view" options when it comes to forms such as on a dynamic share or bulk share page.

The "New view" is a newly designed version that offers improved organization and a more intuitive user experience. This view is included in the Helium update set from Perspectium, so if you're on Helium, this is likely the default view that you'll see. 

The "Legacy view" uses the previous (or "classic", if you will) view, used in the Gold release and earlier. 

To check what view you're on, check the top of your dynamic share or bulk share page. If you are in the new view, it will say Shared He20 Standard view and if you are in the legacy view, it will say Shared view. Here's an example of a new view:

You may prefer one style over the other. Here's how to switch between the legacy and new view:

1. In your sharing ServiceNow instance, go to Perspectium > Perspectium Core > Shares > Dynamic Share or Bulk Share > View Dynamic Shares or View Bulk Shares.
   
   
2. Find and click into the dynamic share or bulk share that you want to update.
   
   
3. Scroll down to the Related Links section and click either Legacy view or New view.

↑ Go to top of page

Add display value language

This feature allows you to change the language of display values in your sharing instance. This feature only works for language translations that have been downloaded on your instance. 

There are a couple things you need to do first in order to make use of the feature:

 First, you need to activate the language plugin in your ServiceNow instance.

 Then, you need to Enable DataSync to add display value fields for reference and choice fields (prefixed with 'dv_' by default)

Finally, you're ready to set up your dynamic or bulk share to add display value languages:

1. In your sharing ServiceNow instance, go to Perspectium > Perspectium Core > Shares > Dynamic Share or Bulk Share > View Dynamic Shares or View Bulk Shares.
   
   
2. Find and click into the dynamic share or bulk share you want to enable the feature on.
   
   
3. Click the the Miscellaneous tab and check the Advanced box. This will reveal a new Advanced tab (if the Advanced box wasn't already checked).
   
   
4. Click the Advanced tab and check the Add display value language box, then select your desired language from the Display value language field.
   
   
5. Click Update. 

↑ Go to top of page

Data obfuscation

This feature allows your to create obfuscation rules for your dynamic/bulk shares per the the General Data Protection Regulation (GDPR). This is useful for cases where you want to "mask" data contained in your share that may be classified as sensitive.

Here's how to make use of data obfuscation:

1. In your sharing ServiceNow instance, go to Perspectium > Perspectium Core > Shares > Dynamic Share or Bulk Share > View Dynamic Shares or View Bulk Shares.
   
   
2. Find and click into the dynamic share or bulk share you want to enable the feature on.
   
   
3. Click the the Miscellaneous tab and check the Advanced box. This will reveal a new Advanced tab (if the Advanced box wasn't already checked).
   
   
4. Click the Advanced tab and check the Enable data obfuscation box.
   
   
5. Scroll down to the table at the bottom of the page and click the PSP Data Obfuscations tab. This will only be available if you have checked the box in Step 4.
   
   
6. In the PSP Data Obfuscations tab, click New. If using Google Chrome, you may see a popup asking if you want to leave the site—click Leave.
   
   
7. Type any Name for your new rule and enter a number in the Order field to indicate when your data obfuscation rule will run compared to other data obfuscation rules in the same share (in ascending order)
   
   
8. Finally, use the Type dropdown to choose a data obfuscation rule type based on the following options:
   
   

   cation rule type from the following options:

   Type of Data Obfuscation Rule	Description
   Field	Choose a field whose value you want to obfuscate. If this value appears in multiple spots throughout the record, you can optionally choose the Obfuscate value throughout record option. The Masking Value (special characters only) or Masking Statement (alphanumeric characters) you enter will replace your specified field's value in the record. If choosing the Hashed option, your specified field's value will be obfuscated via the hashing algorithm (SHA-1, SHA-256, or MD5) you select from the Hash Function dropdown.
   Pattern	Specify a JavaScript regular expression pattern in the Pattern field to search for and replace in your share's outbound message. The Masking Value (special characters only) or Masking Statement (alphanumeric characters) you enter will replace your specified pattern's value in the record. If choosing the Hashed option, your specified pattern's value will be obfuscated via the hashing algorithm (SHA-1, SHA-256, or MD5) you select from the Hash Function dropdown.
   Replacement	Specify search values that will be replaced by a masking value. To create a Replacement data obfuscation rule, first create a new data obfuscation rule with Type Replacement and click Submit. A related list of search value records will appear at the bottom of the form. Each search value will be replaced with the masking value if found in your share's outbound message. When choosing the Replacement type, you can upload a CSV file as a list of comma-separated search values by clicking Import replacement dictionary (.csv). This will take the user to a confirmation page to upload a file.  NOTE: You can quickly add a large number of search values to replace by uploading a CSV file. The CSV file should be a list of comma separated search values which will be added to the Replacement rule.

   
   

9. Click Submit to save the new rule, and then click Update back in the share page.

Data obfuscation dashboard

You can easily view all of your data obfuscation rules for dynamic shares or bulk shares at the Data Obfuscation Dashboard.

To access, go to Perspectium > Perspectium Core > Shares > Dynamic Share or Bulk Share > Data Obfuscation Dashboard. You will see the same dashboard, with both dynamic and bulk shares listed, regardless of the path you get there.

The Data Obfuscation Dashboard is essentially just a breakdown of all existing rules. The first column in the tables show the name of each share which will take users to the respective share when clicked on. The table specifies which table each share is targeting. The last three columns show each type of data obfuscation (Field, Pattern, or Replacement). A green checkmark indicates at least one data obfuscation rule of that type is active for that share, whereas a red X indicates no data obfuscation rule of that type is active. The dashboard also shows the total number of records obfuscated from each table as well as the total number of obfuscation rules on each table.

↑ Go to top of page